6121 E Cleveland Blvd Caldwell Idaho 83607 (Between Caldwell & Nampa)~ ph (208) 459-9622 ~ Hours: Wed-Fri 11am-5pm, Sat 11am-6pm and Sun 11am-4pm
Deco Foil™ Fusible Spray Adhesive is a permanent adhesive intended to make foiling on fabric even easier. Simply pick your favorite stencil, spray on fabric, and iron your favorite color foil to create beautiful designs!
Works great with fabrics! Make sure to use one of our many textile friendly foils. Step 1 - Place stencil design onto fabric. Mask off surrounding area to prevent overspray. For best results, spray back of stencil with repositionable spray adhesive. Step 2 - Shake well before use. Hold can upright, 6-8 inches for surface. Press nozzle in short bursts using a sweeping motion to apply an even medium coat of adhesive on fabric, making sure to cover the entire area. Step 3 - Remove stencil and allow Deco Foil Fusible Spray Adhesive to dry for 10 minutes. Step 4 - Cut a piece of foil slightly larger than the design. Place foil, color side facing up, on top of adhesive design. Place a piece of parchment paper over the foil. Preheat iron to a high setting with steam. Place and hold the iron with firm pressure for 10 seconds on each section until entire piece is bonded. For best results, move iron slightly to avoid steam holes. Step 5 - Washing Instructions: Hand wash and lay flat to dry. If needed, machine wash on cold, delicate cycle. Do not iron or place in Dryer. Step 6 - Step 7 - Remove parchment paper only and allow foil and adhesive to cool completely. For best results allow to cool for 1-2 hours. Peel foil transfer sheet away from adhesive design. Directions for use: Always pre-test for best results. Protect you